Cold storage rooms

The sealing is clearly superior to the classic solutions due to the Master type joining system. Thus, the thermal bridges are eliminated, a critical factor in ensuring the correct enveloping of the insulated surface. It is a decision factor for both residential and industrial applications.

Due to the closed cellular system, Thermoconfort impermeability minimizes the action of water and does not allow infiltration. Because it does not retain water, it significantly reduces the drying time of buildings, whether industrial or residential. Thus, the activity of companies can start faster or a building can become habitable faster. Compared to the classic solutions that lose 50% of their performance in 10 years, due to the Thermoconfort impermeability, they keep 99% of their initial properties.

Many of our customers have chosen to use Thermoconfort because in addition to the degree of thermal insulation it has, the product also has sound insulation properties. Even event halls use Thermoconfort to ensure that noise does not spread in the vicinity.

Whether we are talking about the cold or hot season, the temperature in a room insulated with Thermoconfort remains constant. The energy consumed is significantly lower than conventional insulating materials due to the Lambda coefficient of 0.021 W / Mk. The temperature gradient at which the frame operates decreases (-30 ° C in winter, 70 ° C in summer) for an uninsulated roof at 5 ° C in winter, max. 35 ° C summer. This is good for wood because it increases its lifespan.

Using Thermoconfort reduces the thickness of thermal insulation material required by up to 50% compared to extruded materials and up to 100% compared to classic variants.

For the carpentry elements, the panels can be cut in such a way as to cover 1-2 cm in profile and no new cladding with another material is necessary. After gluing the panels to the wall, the record profiles of carpentry with mesh and the exterior corners with the corresponding putty can be mounted directly. The workmanship related to making the window sills is greatly reduced.

You have the guarantee that the thermal insulation properties of the system put in place last more than 50 years! Following the accelerated aging tests simulating 10 years of freeze and thaw cycles, Thermoconfort reaches a Lambda coefficient of 0.024 W / Mk.

Unlike the classic thermal insulation alternatives, Thermoconfort provides excellent resistance against all types of fungi or mold. Not even insects or rodents make their nests. It is an important aspect in choosing thermal insulation because rodents can cause fires, allergic reactions and are carriers of disease. Thermoconfort provides the ideal environment for people.

The product has a high compressive strength, a special mechanical strength and a very high load-bearing capacity. It is enough to allow the installers to run the roof without treading and to step on them without problems. The compressive strength is over 150 kPa which means over 15 tons / sqm.

The fire simulation tests we performed highlighted the protection capacity of the building structure. In such a scenario, the surface is carbonized and does not allow the fire to spread. Industrial customers are expressly interested in this aspect, always being a risk that must be taken into account when developing the business plan.

Losses during assembly and waste produced during it are minimal. The impact of the thermal insulation coefficient is reflected by a low energy consumption. At the same time, this economy ensures a care for the environment.

Therefore, Thermoconfort is suitable for any type of application specific to known thermal insulation variants. Compared to the other PIR type plates, the Thermoconfort veneer allows applications with plaster. The composition of Thermoconfort sheets is chemically inert, it does not react with alkaline concrete compounds. Any surface can be insulated using Thermoconfort.